To enable efficient manufacture at competitive rates we are able to provide Nikkalite® retroreflective printed barrier faces in two different formats to Diagram 7105 of the Traffic Signs Regulations and General Directions 2016. The red block area is printed beneath the tough top surface layer offering excellent damage and scratch protection in use.
Barrier rolls are 143mm x 200 metres in length and suitable for application via certain laminating equipment allowing fast efficient processing. Alternatively the rolls allow lengths to be cut as required and applied individually.
Barrier strips can be provided accurately guillotined in various lengths to suit individual barrier designs. Typically provided in 750mm or 1000mm lengths shorter lengths can also be provided.
T4315 is supplied with a high tack adhesive in roll form and suitable for application to many approved and *recycled plastic substrates.
Guillotined lengths can be provided in either high tack or low tack adhesive. (*Samples of barrier substrates should be tested to confirm suitability of adhesive to substrate type).
T4315 new sheeting meets or exceeds the following requirements specified in BS 8442 Miscellaneous road traffic signs and devices with references to BS EN 12899-1; 2007.
220.127.116.11.1 Glass bead Class CR1 Table 1 Daylight chromaticity and luminance factors for White and Red colours.
18.104.22.168 Table 3 Coefficient of retroreflection Class RA1
22.214.171.124 Resistance to impact of retroreflective sign face materials.
126.96.36.199.1 Glass bead materials resistance to accelerated natural weathering BS 8442 Table 1 exposure period 2 years.
Performance details above are applicable for sheetings applied to approved substrates in line with NCI procedures and erected vertically in the UK or Ireland.